Tag: Mini Vox

Mini Vox Robot Hacking

Projects

Yes, I went to Radio Shack today. And, yes, I will still call it Radio Shack. And, yes, sometimes you need a quick electronics fix. I get most of my stuff online these days.

Radio Shack had the Erector Spykee Mini Vox robot on sale for $10. The Mini Vox takes voice commands and makes the robot move, talk, dance, and even fire a “laser.” The box says, “Ages 7+” – I fit that category. The box also says, “Some assembly required.” It should have said, “Some de-assembly required.”

Mini Vox Voice Controlled Robot

While playing with the demo model at the store, I realized that I could reuse the voice commands to set inputs on a microcontroller.

The voice commands go something like this:

“Mini Vox”

Robot beeps

“Forward”

Robot moves forward

Here are all of the commands and their response:

    1. “Forward” – DC motors get positive voltage
    2. “Backup” – DC motors get negative voltage
    3. “Turn Left” – One DC motor gets positive voltage and the other negative
    4. “Turn Right” – One DC motor gets positive voltage and the other negative
    5. “Laser War” – LEDs flash and RGB LED flashes different colors
    6. “Yo Man” – Says “Yo Man” back at you and RGB LED flashes different colors
    7. “Electro Dance” – Makes sounds, LEDs flash, RGB LED flashes different colors, and DC motors pulse on and off
    8. “Destroy Target” – Says, “This is my favorite,” makes sounds, flashes LEDs, and RGB LED flashes colors

When I got Mini Vox home, I ripped it apart. I was quite surprised how responsive the voice commands are and how many parts are inside this little robot. Most of the parts are reusable.

Here’s what you get for your $10 investment:

    • Orange LED (x2)
    • RGB LED
    • DC Motor (x2)
    • Motor Driver Circuit Boards (x2)
    • 8 ohm Speaker
    • Microphone
    • Slider Switch
    • Momentary Push Button
    • Lots of screws

Mini Vox Guts

The forward and the back voice commands are the easiest to tap into. You can disconnect the DC motors and connect them to a digital input of a microcontroller and now you can use voice commands to set the state of 2 digital inputs and act on them.

If I come up with something clever, I will let you know. But, the first piece of my Iron Man suit has fallen into place.